Automec Backgauges
Home > Gauging Equipment > Automec Backgauges
A Mechanical
- Holding Force 200 lbs.
- Number of Drives 1
- Weight 200 lbs.
- Overall Height 26"
- Overall Depth 45"
- Overall Width 16"
- Gauge Bar Length 3'
- Positioning Speed 600 IPM
- Gauge Travel 24"
- Repeatability ± .002"
- Vertical Height Adjustment 10"
- Recommended Width Up to 4'
B Mechanical
- Holding Force 400lbs.
- Number of Drives 2
- Weight 300 lbs.
- Overall Height 26"
- Overall Depth 45"
- Overall Width 40"
- Gauge Bar Length 7'
- Positioning Speed 600 IPM
- Gauge Travel 24"
- Repeatability ± .002"
- Vertical Height Adjustment 10"
- Recommended Pressbrake
- Sideframe Width 5' to 8'6"
HD Mechanical
- Holding Force 400lbs.
- Number of Drives 2
- Weight 300 lbs.
- Overall Height 26"
- Overall Depth 45"
- Overall Width 77"
- Gauge Bar Length 11'
- Positioning Speed 600 IPM
- Gauge Travel 24"
- Repeatability ± .002"
- Vertical Height Adjustment 10"
- Recommended Pressbrake
- Sideframe Width 9' to 14'
MB Mechanical
- Recommended press brake 3' to 8'6" width (Between side frames)
- Tilting gauge bar std.
- Fold-down gauge bar std.
- No. of drive screws 1
- Gauge height adj. 10"
- Gauge travel 20"
- Gauge speed 600"/minute
- Resolution .001"
- Repeatability ± .002"
BP Mechanical
- Holding Force 400lbs.
- # of Drives 2
- Weight 300 lbs.
- Overall Height 26"
- Overall Depth 45"
- Overall Width 40"
- Gauge Bar Length 7'
- Positioning Speed 600 IPM
- Gauge Travel 24"
- Repeatability ± .002"
- Vertical Height Adjustment 10"
- Recommended Pressbrake
- Side frame Width 5' to 8'6"
TD Mechanical
- Holding Force 600lbs.
- # of Drives 3
- Weight 450 lbs.
- Overall Height 26"
- Overall Depth 45"
- Overall Width 148"
- Gauge Bar Length 18'
- Positioning Speed 600 IPM
- Gauge Travel 24"
- Repeatability ± .002"
- Vertical Height Adjustment 10"
- Recommended Pressbrake
- Sideframe Width over 14'
