Roundo Plate Bending
For All Dimensions and Applications Our 3-roll and 4-roll bending machines feature the largest selection of options and accessories on the market. The standard range covers thicknesses of 3 - 100 mm (1/8” to 4”), and widths of 1 000-8 000 mm (3’ to 26’). This means that ROUNDO has a machine for virtually every application.
All ROUNDO 3-Roll Plate Bending Machines offer:
- Hydraulic drive with infinitely variable speed control on all three rolls.
- Hydraulic infinitely variable adjustment of the two lower rolls.
- Ensured parallelism of rolls even with maximum load.
- Spherical roller bearings of highest quality for longer service life.
- Hydraulically operated drop end.
PSE
- Diameter of rolls 110 – 185 mm.
- Length of rolls 1000 – 3000 mm
- Plate thicknesses from 1 mm up to 7 mm depending on size.
- Control panel fixed to the machine frame.
PSE
- Diameter of rolls 205 – 600 mm.
- Length of rolls 1000 – 8000 mm
- Plate thicknesses from 1 mm up to 70 mm depending on size.
- Portable push button control.
PSE
- Diameter of rolls 600 – 1000 mm.
- Length of rolls 2000 – 8000 mm
- Plate thicknesses up to 100 mm depending on size.
- Separate hydraulic motors for each roll.
- Control panel with joysticks on wheels or on swing arm.
For all dimensions and applications Roundo's 3-roll and 4-roll bending machines feature the largest selection of options and accessories on the market. The standard range covers thicknesses of 3 - 100 mm (1/8” to 4”), and widths of 1 000-8 000 mm (3’ to 26’). This means that ROUNDO has a machine for virtually every application.
All ROUNDO 4-Roll Plate Bending Machines offer:
- Hydraulic drive with infinitely variable speed control on all three rolls.
- Hydraulic infinitely variable adjustment of the two lower rolls.
- Ensured parallelism of rolls even with maximum load.
- Spherical roller bearings of highest quality for longer service life.
- Hydraulically operated drop end.
PASS Specifications
- Diameter of rolls 110 – 310 mm.
- Length of rolls 1000 – 6000 mm
- Plate thicknesses from 1 mm up to 25 mm depending on size.
- Parallelism of lower roll ensured by wedge blocks.
- Portable push button control.
PAS Specifications
- Diameter of rolls 340 – 1000 mm.
- Length of rolls 1000 – 8000 mm
- Plate thicknesses from 5 mm up to 100 mm depending on size.
- Parallelism of rolls electronically controlled.
- Separate hydraulic motors for top and lower rolls.
- Control panel on wheels or on swingarm.
PASC Specifications
- Diameter of rolls 340 – 700 mm.
- Length of rolls 1000 – 6000 mm
- Plate thicknesses up to 70 mm depending on size.
- Parallelism of rolls mechanically controlled.
- Simplified hydraulic and electronic systems compared with PAS.
- Control panel on wheels or on swingarm